Should You Plug Your Headphones Into Your Blue Yeti? – Home Studio Expert

It can be tempting to use your blue yeti mic directly without plugging in your headphones since, after all, the device has a good reputation for quality audio output. while some can record directly, others prefer to monitor their audio by connecting headphones to the device. so should you plug your headphones into your blue yeti?

You must plug your headphones into the 3.5-millimeter (0.04-inch) jack on your Blue Yeti for several reasons. plugging in a headset ensures you listen in real time with no latency delays, allowing you to make any necessary edits and adjustments without the need for major edits later.

Reading: Yeti nano headphone jack

In this article, I’ll discuss why you should connect your headphones to your Blue Yeti and how to do so. clever? So let’s get straight to the point.

reasons to connect headphones to your blue yeti

Below are four of the most compelling reasons why you should connect your headset to your blue yeti microphone.

headphones will improve your microphone technique

Connecting headphones to your blue yeti will allow you to monitor your audio in real time. this helps you spot potential flaws and make the necessary changes. for example, you’ll know if you’re talking too close to the blue yeti or if the overall volume is low through the headphones.

This immediate feedback will help you change settings or move further away from the device, which goes a long way in improving your recording experience.

Check out my list of the best studio headphones under $50.

headphones help reduce editing work

Editing generally requires a lot of attention to detail to achieve desirable results. however, editing to correct errors makes the entire process more challenging and time-consuming, which can be overwhelming if you’re relatively new to the task.

Connecting headphones to your blue yeti will allow you to monitor the audio quality and make changes immediately as you detect failures. minor noises and errors can leave you with poor quality audio that is difficult for even the most experienced producers to correct.

But with a high-quality headset by your side, you’ll be in a good position to spot potential glitches like clicks, low recording volume, or even ambient noise. once you notice the glitches in real time, you can easily pause the recording and make any necessary changes before picking up where you left off with clean, crisp audio.

headphones are ideal for interviews

While you may have good microphone technique, you could end up with a lot of takes when dealing with guests who have little microphone experience. guests may pay little attention to the microphone, resulting in poor audio quality.

connecting headphones to your guest’s microphone will allow them to listen to your recording and respond accordingly.

You won’t have to constantly advise your guests to move closer or further away from the microphone, since they can hear themselves and how they sound. the headphones will not only improve the quality of the recordings but will also make your guest feel much more comfortable and confident during the session.

Check out my list of guides to the best open-back headphones.

blue yeti comes with a standard headphone jack

See also: What size is the headphone jack on a ps4 controller

blue yeti also comes with a standard 3.5mm (0.04 inch) jack which is compatible with most professional and amateur headphones, meaning you won’t have to search.

Another great reason to connect headphones to your blue yeti is that it won’t negatively affect your recording.

If anything, it will help improve your results, as you’ll be more aware of how it sounds rather than waiting to hear the recorded version.

is designed to make recording easy as you will be in full control of the recording you are making.

Check out my list of the best studio headphones under $100.

how to set up a usb blue yeti on a computer

Not sure how to set up your Blue Yeti and get the most out of your device? if so, this section will be useful to you. Below are the steps to follow when setting up your Blue Yeti on a computer.

  1. download drivers: the first step is quite easy as you will need to go to bluemic.com and download the blue yeti usb 2.0 driver.
  2. connect the device to your computer: plug the usb cable into the usb port on the bottom of the microphone. Complete the connection by plugging the cable into your computer’s USB port.
  3. go to control panel: once you have accessed the control panel, you will need to click on the sound icon and select the yeti pro stereo microphone option to activate your blue yeti.
  4. click the output tab: you will need to click the output tab on your computer and select the yeti pro stereo microphone option if you want to use headphones through your blue yeti.

why blue yeti headphone jack not working?

It’s normal for your yeti’s headphone jack to misbehave from time to time, especially if you don’t set up the device correctly. Below are the main causes and solutions to blue yeti headphone problems.

sound source

As mentioned in the previous section, you will need to select your microphone as the sound source on your computer.

connecting a usb cable will not be enough to record and listen to audio through your blue yeti. you will still need to go to the control panel and set the device as your preferred sound source.

see how to reduce background noise on a blue yeti microphone.

bad connection

Although the blue yeti is easy to set up and use, you will need to take care to ensure that the device connects perfectly to your computer’s usb port.

And if you plan on using headphones, it’s also crucial to check the connection, as you won’t be able to monitor audio if you don’t fully insert the headphone plug into the yeti’s jack.

If you’ve already set the blue yeti as your computer’s sound source and it still doesn’t work, check under the device to confirm the plug is properly inserted.

volume settings

another common mistake that prevents you from monitoring audio when recording on a blue yeti is the volume setting. it could be that the volume is too low or the device is on silent.

See also: How to fix headphones where one side is quieter than the other? – Red Diamond Audio

so if you’ve done all the steps above (choose as audio source and check connections) and still can’t hear audio through your headphones, try turning up the volume knob.

You’ll also know the blue yeti is muted if the indicator light keeps flashing.

loose usb port

sometimes the problem is not with the blue yeti, but with your computer. If you haven’t been using your USB port for a while, it’s probably loose or damaged, which means your USB microphone won’t be recognized.

While it is possible to fix the damaged usb port on your own, it is advisable to consult with experts if you have never done it before.

damaged device

In rare cases, the problem could be with your blue yeti. If your device is faulty, you may not be able to use most, if not all, of its features.

The trick with the blue yeti is to check the indicator light to see if it works in the first place. if it works fine, then the problem could be with the headphone port.

check to see if the port is clean or has any debris that may prevent the connector from going in all the way.

frequently asked questions

do you have to plug your headphones into the blue yeti mic?

It is not necessary to connect headphones to the blue yeti. The Yeti has a headphone output jack that allows you to listen to your recordings without having to use external speakers. if you want to use headphones while recording, just plug them into the headphone jack and they will work just fine.

can you plug headphones into a blue yeti mic?

yes, you can connect headphones to a yeti blue microphone. the headphone jack is on the front of the microphone. simply use the included 3.5mm audio cable to plug your headphones into the headphone jack on the front of the microphone.

can you use wireless headphones with blue yeti?

yes. blue yeti can be used with wireless headphones using a bluetooth transmitter.

A bluetooth transmitter is a device that plugs into your device’s headphone jack and sends the audio signal wirelessly to your headphones. There are many different Bluetooth transmitters on the market, so you can find the one that best suits your needs. Some popular Bluetooth transmitters include the Anker SoundSync A3352 Bluetooth Receiver.

last updated on 08-12-2022/affiliate links/amazon product advertising api images

summarizing

While not required, plugging in headphones gives you more control when recording with the Blue Yeti and different types of microphones.

You will need to set the device as a sound source on your pc and verify that you have properly plugged in the headphone jack.

If there is any problem hearing through the headphones, please check the volume settings, as there could be a chance that the yeti is muted or low volume.

See also: Can Headphones Dent Your Head? | PlayTheTunes

sources

  • bluemic: blue yeti products
  • help wiki.evergreen: yeti pro usb/xlr microphone
  • bluemic: yeti support
  • my new microphone : how usb mics work and how to use them
  • game haven: some downside of plugging headphones into the blue yeti
  • indie panda: why musicians wear headphones when recording

Leave a Comment