Fix the Headphone Jack Not Working in Windows 10 | SoftwareKeep

There are many cases where the headphone or headphone jack is not working in Windows 10. Anything from faulty hardware to a system problem can cause audio issues. In this article, we’ll look at how you can fix them, no matter what caused the error.

headphone jack not working

Reading: Speaker headphone jack not working

why isn’t my headphone jack working?

windows 10 is a complex operating system with complex problems. Tracking down what exactly caused your headphones or headphone jack to stop working requires some guidance. you can find some of the most common causes of this error in the list below. use this information to diagnose your problem and apply the most effective solution from our article.

  • physical damage. If your headphones or the headphone jack is damaged, it will most likely not work. examine both and see if there is any physical damage to the devices that could interfere with their functions.
  • software error. If an app installed on your device is interfering with your headphones or the headphone jack, you may not be able to use it properly. to fix this, simply remove or configure the problematic application.
  • outdated drivers. Your drivers allow your devices to work with Windows 10. If your sound and audio drivers are out of date, you may have problems using headphones or the headphone jack. updating drivers is the best solution for this.
  • system problems. When windows 10 has problems, you may not be able to use your headphones or the headphone jack. you can use the methods below to work around these errors and fix the problem.

Related: How to fix “no speakers or headphones connected” error

Solved: Headphones not working on windows 10

See also: The Best Studio Headphone Amplifiers for Distribution & Sub-Mixes | LN

Now that we’ve looked at some possible causes, it’s time to fix it. Use any of the methods below to get started on the issue with your headphones or headphone jack in Windows 10.

method 1. connect your headphones and restart your computer

  1. While your computer is still on, plug your headphones into the headphone jack.
  2. Please wait a few seconds before restarting your computer:
  • open the start menu and click the power button.
  • select restart.
  • wait for your computer to finish rebooting.

method 2. disable front panel jack detection

If you have a realtek sound card, you can try to fix this by turning off front panel jack detection.

Don’t worry, this doesn’t necessarily mean the front panel connector is no longer usable. in some cases, it is just the opposite. This method is able to solve the problem that the front panel connector is not working.

  1. search for control panel in your search bar, then open the app from your results.
  2. change your display mode to large icons using the drop-down menu at the top right of the window.
  3. scroll down and click realtek hd audio manager. If you don’t see this option, you most likely don’t have the correct drivers or you’re using a different brand of sound card.
  4. click the connector settings icon .
  5. turn on the disable front panel jack detection option, then press the ok button.
  6. restart your computer . after doing this, try to connect your device to the headphone jack and play audio.

method 3. change the default sound format

  1. search for control panel in your search bar, then open the app from your results.
  2. change your display mode to large icons using the drop-down menu at the top right of the window.
  3. click the hardware and sound tab.
  4. select sound.
  5. In the playback section, double-click the default playback device. a new window should open.
  6. switch to the advanced tab. here, change the default sound format from the drop-down menu to something else.
  7. click the ok button and restart your computer. check if your headphones or headphone jack is working properly.

method 4. enable playback device and set it as default playback device

  1. search for control panel in your search bar, then open the app from your results.
  2. change your view mode to large icons using the drop-down menu at the top right of the window.
  3. click the hardware and sound tab.
  4. select sound.
  5. in the playback section, right-click anywhere and select the show disabled devices option. this will show your device even if it wasn’t showing up previously.
  6. right click on the broken headphone device. select enable to ensure audio playback from your computer is not blocked.
  7. click the set as default button now available.
  8. click the ok button and restart your computer. check if your headphones or headphone jack is working properly.

method 5. run the windows 10 audio troubleshooter

windows 10 comes equipped with some pretty useful troubleshooters. luckily, there’s even one for audio and sound issues.

See also: 10 Best EDM Artists and Their Headphones – Headphonesty

Note: These troubleshooters are easy to run and accessible to everyone. The sound troubleshooter is not guaranteed to successfully find and resolve your problem, so it’s worth a try!

  1. Open the settings application by pressing the windows + i keys on your keyboard. alternatively, you can click the gear icon in the start menu.
  2. click the update & security.
  3. select troubleshoot from the left side menu.
  4. click play audio below from the get started category.
  5. click the run the troubleshooter button.
  6. wait for the troubleshooter to search for problems. if something is detected, you have the option to fix it automatically.

After the troubleshooter tries to fix it, try playing audio on your headphones. Don’t worry if you still can’t hear anything, we have several other methods for you to try!

method 6. update your sound and audio driver

Regularly updating your drivers is something you should do all the time. outdated audio drivers can cause more problems than you think.

  1. press and hold the windows key, then press r. this will start the run application.
  2. Type “devmgmt.msc” without the quotes and press the ok button to open the device. administrator.
  3. expand the sound, video, and game controllers section by clicking the arrow icon.
  4. right-click the controller and select update the driver.
  5. click Search automatically for updated driver software.
  6. if windows can find an updated driver, automatically download and install the update on your computer.
  7. restart your pc and test if the headphone or headphone jack issue is resolved.

final thoughts

We hope this article helped you fix your headphones and headphone jack in windows 10. If you need further assistance, please don’t hesitate to contact our IT experts at softwarekeep.

If you’re looking for more guides or want to read more tech-related articles, consider subscribing to our newsletter. We regularly publish tutorials, news articles and guides to help you in your daily technological life.

See also: How to connect Bose headphones to Mac – Descriptive Audio

Leave a Comment