How To Fix Unbalanced Headphones On PC / Android (Solved) – Headphonesty

Unbalanced headphones have a number of causes, but they’re also pretty easy to fix with a few simple, easy-to-learn adjustments.

Have you ever used your headphones and noticed that one side is louder than the other? Have you tried adjusting the audio jack, unplugging it, or rotating it with no luck.

Reading: One headphone louder than the other

This can be especially frustrating when one side offers a full spectrum of quality tunes while the other is slightly muted or completely muted. You may be thinking of trading in your headphones for a new pair, but don’t throw them away just yet.

the good news? Balancing the sound of your headphones is usually a simple solution, regardless of whether you’re using a PC or Android. Check out this simple guide to learn how to restore balance to your uneven headphones.

what causes unbalanced headphones?

often, the problem lies in one of your audio channels, where the signal is carried from the audio source to the speakers. the signal is split between the left and right channel of the headphones, which usually results in the same amount of sound for both speakers.

however, when there is a deficit in the flow of this signal, it gives the impression that your headphones are unbalanced.

Most headsets work with mono or stereo audio channels. mono means ‘one’, and the signal is sent using a single channel. stereo, on the other hand, uses two different channels with respective sounds sent to the left and right channels.

When a channel is overused or underused, the sounds are split between the channels and this gives the impression that your music is unbalanced.

See also: 6 Best DJ Headphones [2022] – Headphonesty

Unbalanced audio channels can be due to the following reasons:

  • Unbalanced audio channels can commonly occur due to altering the equalizer (eq) settings. when more current is directed to one speaker than the other, frequencies are compromised and the effect is a seemingly unbalanced audio experience.
  • Computers have specialized sound effects that are programmed to alter the perception of the music coming from the sound card. these are located on the control panel and emphasize a mono or stereo sound effect.
  • Connecting headphones to the wrong output can cause unbalanced channels and sound. today this problem is less common as most commercial audio devices are adaptive and can detect input devices.

If you’re curious if your headphones are in sync with your device’s channels, use this helpful left/right stereo test to check your sound balance.

how to fix unbalanced headphones on pc

On a pc, you can check how your audio channels are being used through the “sound” section of the control panel. A few simple tweaks here can drastically change the way your headphones produce sound.

  • check that your speakers are balanced equally
  • turn off any special sound effects that may be affecting playback
  • check that your headphones are not connected to a ‘ monkey’ cat

verify your speakers are equally balanced

A difference in the sound of your headphones may be due to an incorrect balance between “left” and “right”. that is, the left or right earphone sounds louder than the other. To check and fix this, do the following:

  1. Open the ‘Control Panel’.
    Open the ‘Control Panel’.
    Open the ‘Control Panel’.
  2. Search for ‘Sound’ and select it.
    Search for ‘Sound’ and select it.
    Search for ‘Sound’ and select it.
  3. Right-click on your headphones, select ‘Properties’.
    Right-click on your headphones, select ‘Properties’.
    Right-click on your headphones, select ‘Properties’.
  4. Click on the ‘Levels’ tab.
    Click on the ‘Levels’ tab.
    Click on the ‘Levels’ tab.
  5. Click the ‘Balance’ button to the right of your device.
    Click the ‘Balance’ button to the right of your device.
    Click the ‘Balance’ button to the right of your device.
  6. Restore the balance so that it is equal, or, adjust the balance until your speakers sound the same.

This simple solution is very effective in altering the left/right balance of most headphones. however, it often doesn’t change because it’s a bit hard to find.

turn off any special sound effects that may be affecting playback

As mentioned above, Windows PCs come with unique sound enhancement features. these functions affect the reproduction of the headphones, so they could be altering the perception of the sound.

To fix this, you can disable all sound effects to simply restore the audio to normal.

  1. Open the ‘Control Panel’.
  2. Search for ‘Sound’ and select it.
  3. Right-click on your headphones, select ‘Properties’.
  4. Click on the ‘Enhancements’ tab.
    Click on the ‘Enhancements’ tab.
    Click on the ‘Enhancements’ tab.
  5. Click the ‘checkbox’ labelled ‘Disable all sound effects’.
    Click the ‘checkbox’ labelled ‘Disable all sound effects’.
    Click the ‘checkbox’ labelled ‘Disable all sound effects’.

disabling all sound effects removes different playback sounds, allowing mono audio to maintain equal channels. this eliminates a ‘3d’ sound effect, but can quickly restore headphone audio balance by mapping the sound to both channels equally.

check that your headphones are not connected to a ‘mono’ jack

Unbalanced headphones can occur if the wrong connector is used. if you only hear from the left earphone speaker, you may be using an audio device with mono output capability or a “mono” connector. To resolve this, try the following:

make sure the headphones are plugged into a headphone port.

See also: How To Use Apple Earbuds As Mic On PC? (Step-by-Step Guide)

A headphone port will be labeled “headphones” or there will be a headphone icon on the device. this means your headphones will get stereo sound and will sound the same in both ears.

make sure you don’t plug your headphones into a “headphone” jack.

Headphones should be plugged into a headphone jack, as plugging them into a headphone jack will only create sound in the left earbud.

If you’re more interested in learning more about headphone jacks, check out our excellent headphone guide to headphone jacks and plugs.

how to balance the sound in headphones on an android device

If one earbud sounds louder than the other on your android device, the accessibility settings could be to blame. These are similar to the sound features on windows devices, mapping audio through mono or stereo channels for better listening.

To check if these settings have been enabled or not, try the following:

adjust headphone balance or turn on “mono audio”

  1. Head to ‘Settings’.
    Head to ‘Settings’.
    Head to ‘Settings’.
  2. Select ‘Accessibility’.
    Select ‘Accessibility’.
    Select ‘Accessibility’.
  3. There, you should find a slider to shift speaker balance either left or right.
  4. If this doesn’t work, you can also check the ‘Mono Audio’ feature. This will return sound via both channels equally, removing a stereo effect but enabling equal playback.
    You can also check the ‘Mono Audio’ feature.
    You can also check the ‘Mono Audio’ feature.

change accessibility settings on your android phone you can balance your headphone audio by adjusting the ‘left’/’right’ volume balance or enabling mono audio.


By now, you’ve restored the sound in your headphones and are listening to your music, audiobooks, or movies with a fully balanced, out-of-this-world audio experience.

or you learned about the intricacies of channel playback and understood how both pc and android devices have certain built-in features that alter the way playback happens. Either way, we hope you can enjoy your balanced headphones without worrying about buying a new pair.

Are your headphones balanced now? did you manage to find the problem that was causing your playback to sound distorted? Were the changes you made minor or major? please comment below!

See also: MSI Headphone Jack Not Working (Causes, Fixes)

Related Posts

Reddit user claims Razer headset literally saved his life

A few days ago, a reddit user by the name ofough_dance_956 made a post claiming that his razer headphones saved his life. he claimed that a stray … Read more

Bragi The Headphone True Wireless Earbuds Review | Digital Trends

bragi’s first truly wireless in-ear headphones, the dash, were perhaps the most advanced headphones ever created, complete with sensors, gyroscopes, and a mountain of other technology. unfortunately, … Read more

Armor All Retractable Clip on Bluetooth Headset AHF9-1007-BLK – The Home Depot

welcome back! login Reading: Bluetooth headphone clip See also: Top 14 Best Earphone/Earbud Brands In The World 2022 – My New Microphone create an account order tracking … Read more

Headphone stand diy

DIY Headphone Stand with Free Woodworking Plans – Making Manzanita

Best looking headphone

RS Recommends: The Best-Designed Headphones Will Have You Listening In Style – Rolling Stone

If you purchase an independently reviewed product or service through a link on our website, rolling stone may receive an affiliate commission. When we’re testing headphones, of … Read more

4 pin xlr headphone cable

HEDDphone Balanced 4-Pin XLR Cable

365-day returns When taron and andrew lissimore created, they wanted to create the audio store they wished existed. as headphone enthusiasts, they dreamed of a store … Read more