Quick access to music stored in your itunes library is just one of the many benefits ipads offer. but if the ipad thinks the headphones are plugged in even though they clearly aren’t, then you can’t hear music.
an ipad that is stuck in headphone mode is not a rare occurrence, and you are far from the only one who has dealt with this problem. sometimes ipad could not turn on as i had found iphone after ios update. usually not a big deal. You are at the right place if you are trying to figure out what to do with ipad stuck in headphone mode or other stuck issues because in this article we will show you how to fix the issue that way.
Reading: Ipad stuck on headphone sound
why does your ipad get stuck in headphone mode?
newer ipads do not have audio jacks and yet can get stuck in headphone mode. Although connecting headphones via bluetooth is recommended for newer iPad models, connecting wired headphones to the device is still an option.
The lighting port can also be used to connect a 3.5mm headphone to your ipad, but if you do this frequently, the device may get stuck in headphone mode. the source of the problem is usually the hardware, although in some cases the ipad’s operating system may be the culprit.
Most of the time you can unstick your ipad on your own, but if physical damage has caused the device to get stuck, you’ll need to repair or replace it.
Getting your ipad out of headphone mode is easy, though troubleshooting the hardware that caused the device to get stuck in the first place can be a tricky operation. Let’s take a look at the top 9 to fix ipad stuck in headphone mode.
this is the first and most obvious thing to do if your ipad is stuck in headphone mode. just press the top button to turn off the ipad and then check if the problem still occurs after turning it back on. You can find out how to turn an iPad off and on on Apple’s support page.
if your ipad has face identification, you can press the volume button and the top button. when you see the power off slider appear, you can drag it to turn it off. take 30 seconds or more to turn on the device.
if your ipad has a home button, you can press and hold the top button. Once the slider appears on your screen, you can drag the slider to turn off the iPad. wait 30 or more seconds and then press the top button to turn on your ipad.
remove the case
While cases can prevent physical damage, they can also block the audio jack, thereby tricking the device into thinking the headphones are connected. the case could also be applying pressure to different buttons that send the signal to the ipad to activate headphone mode. all these problems can be solved by removing the case.
connect another pair of headphones to the ipad
Each set of headphones is configured differently, which can cause a compatibility issue that ultimately caused the ipad to get stuck in headphone mode. try plugging the headphones you are already using into the device and play music for a few minutes.
You should be able to listen to the music normally, and if this is the case, you should turn off all applications and then unplug the headphones. the device should exit headphone mode automatically as soon as you unplug the headphones.
See also: Xbox Series X And Series S Audio Guide: How To Connect And Use Any Headset, Mixamp Or Speakers
If your ipad remains stuck in headphone mode after unplugging the headphones, you should try plugging in another pair of headphones and repeat the whole process. sometimes headphones configured differently can solve the compatibility issue that the device has encountered.
check if the bluetooth speakers work
connecting speakers via bluetooth is another option that you have at your disposal. ipad may get confused after unplugging the wired headphones because the command was not given after removing the headphones from the audio jack.
Pairing the speakers with the device via bluetooth for a few minutes and then turning off the connection will reset the headphone mode and hopefully help your ipad out.
perform a hard reset
a hard reset will restore ipad to original settings and after a reset the device should no longer be in headphone mode.
a hard reset on ipad models produced before 2018.
Step 1. Press the power and home buttons simultaneously and hold until the ipad screen goes black.
Step 2. Release the buttons after the apple logo reappears on the screen and wait for the device’s operating system to load.
ipads newer after 2018.
step 1. press the volume up button and immediately release it, and then do the same with the volume down button.
step 2. press and hold the power button and wait for the screen to turn black and release it once the apple logo appears on the screen again.
Try plugging in the headset after a hard reset to check if the device has exited headset mode and is working properly.
turn on airplane mode
Your ipad will go offline after you turn on airplane mode, which might help the device get out of headphone mode once it’s back online. To enable airplane mode on an ipad you will have to follow these steps:
- access the control center and then touch the airplane mode icon. alternatively, you can go to settings and enable airplane mode from there.
clean the port
Check for traces of dirt on the lighting port or dirt on the headphone jack. or debris can clog the headphone jack. also, the tip of the earphones can break off and get stuck in the audio jack, which is why ipad thinks the earphones are still plugged in.
Keep in mind that removing stuff from a headphone jack lighting port is really hard and even a small mistake can cause irreparable damage. You can try blowing air into the headphone jack or lightning port to remove debris, but be aware that it may not accomplish much.
See also: Silver Dragon Headphone Cable
Optionally, you can try using a straw, cotton swab, or pen to remove any dirt, but do so carefully to avoid damaging the headphone jack or lightning port.
update the ipad to the latest version
Make sure your device is up to date because sometimes an outdated system can cause your ipad to get stuck in headphone mode.
You can check if the latest updates are installed on your device.
start the configuration application > open the general menu > tapping on the software update.
If you found a pending update, proceed to install it.
solve ipad stuck in headphone mode issue with anyfix
In case the software malfunction is the reason why the ipad thinks the headphones are plugged in, anyfix -ios system recovery can help you solve this problem quickly. anyfix is a professional system repair tool that helps fix many common problems that ipad users may encounter. Furthermore, it provides several solutions to help iPhone, iPad and iPod users to get out of headphone mode stuck problem. this is how you can repair your ipad with anyfix.
step 1. download anyfix, install and run it on your computer. connect your ipad to computer and choose system repair mode.
step 2. now you can choose the 40+ ipad problems and then click start now to continue.
Step 3. Here will be a list of 3 modes you can choose from. we strongly recommend the standard repair which will not risk data loss.
step 3. hit the repair button and let anyfix work its magic. After the software is done, you can check if the ipad is still stuck in headphone mode.
While having your iPad stuck in headphone mode may seem like a benign problem, it is anything but because it can indicate physical damage to the headphone jack or lightning port.
However, if the problem is caused by a software malfunction, you won’t have a hard time solving it, as in most cases, a hard reset will be enough to get the ipad off of headphone mode. You can also repair your device’s system with anyfix – ios system recovery if you’re not sure what caused the problem and don’t want to spend time trying to determine where the problem is coming from.
hopefully this article has helped you get your ipad out of headphone mode. Leave a comment and share your experiences with us.
See also: Did Removing the iPhones Headphone Jack Increase Lightning Port Damage? | iFixit News